Hydraulic veneer guillotine designed for light to medium duty use, IE: custom shops and manufacturers with light to moderate veneering. The machines are completely manufactured by welded steel appropriately annealed.
Complete with a rear feed for the parallel cutting of the veneer pack which is electrically operated from the control panel. The size between the knife and the rear feed is read with a digital readout on front of the machine.
All sliding parts are mounted on self-lubricating material. As no lubrication is necessary, the danger that drops of oil can stain the veneers is avoided.
A front squaring arm on the table helps in cross-cutting operation and angled cuts. The presser is always parallel to the working table through a torsion bar. The knife and presser movements are powered by hydraulic cylinders.
All these machines are complete with cutting edge light. They have a selector switch so you can choose if you want to work with single manual operations or with complete automatic cycle. Machines are complete with photocells, safety guards, approved equipments.
Model / Throat Size
TSO 2650 / 104 inches
TSO 3100 / 122 inches
TSO 3600 / 141 inches